Category Archives: Uncategorized

What is GMT MOULD?

MDC specialized in compression moulds , GMT mould is one kind of them .

so what is is GMT ?

GMT is Glass Mat Reinforced Thermoplasitcs, a kind of sheet molding compound with fiber reinforced thermoplastic. It is produced on huge laminators, using a thermoplastic resin and one or more forms of reinforcement. The process yields a lightweight, partially consolidated, semifinished composite in sheet form. Most forms are produced to 1,300 mm to 1,400 mm widths. However, some newer forms are made to greater but proprietary widths. The sheet stock may be cut to size to suit placement in the tool for a specific application and also can incorporate a decorative or functional surface laminated to one side. GMT mould makes possible the production of large parts with low tooling costs and fast cycle times via compression molding. The potential for parts consolidation presents the opportunity to further reduce weight and cost.

What’s the advantage of GMT mould parts?

Utilization of regenerated、Low forming pressure、Long storage period、Short shaping cycle、High production efficiency

What’s the mostly application of GMT mold?

GMT mold is mostly used in Automotive and building&construction, chemical industry, packaging, sport equipment, etc.

Please keep in touch with us, when any doubts on GMT Mould.

Taizhou Huangyan MDC Mould&Plastic Co.,ltd

Add: No.35-1 Qingfeng Rd, Huangyan North industrial estate, Taizhou City, ZheJiang, China, 318020

E-mail:master@zjmdc.com;https://www.zjmdc.com/SMC_mould.html

Tel:+86-576-84616076

MDC MOULD -COMPRESSION MOULD

compression mould
Molding temperature of compression mould
The molding temperature depends on the curing system of the resin paste, the thickness of the product, the production efficiency, and the complexity of the structure of the product. The molding temperature must ensure the initiation of the curing system, the smooth progress of the crosslinking reaction, and complete curing.

In general, part having a large thickness should have a lower molding temperature than a thin-walled part, which prevents excessive heat produce heat build-up inside the thick part. If the thickness of the product is 25-32 mm, the molding temperature is 135-145 °C. Thinner part can be formed at 171 °C.

The increase of the molding temperature can shorten the corresponding curing time; conversely, when the molding temperature is lowered, the corresponding curing time needs to be extended. The molding temperature should be chosen between the fastest cure speed and the optimum molding conditions. It is generally believed that the SMC molding temperature is between 120 and 155 °C.

Mold detail about the compression mould, please don’t hesitate to keep us informed as below:

T:+86-576-84616076; F:+86-576-84616079

E-mail:master@zjmdc.com;
https://zjmdc.com/Compression_Mould.html

CHUANGYUAN MOLD

CHUANG YUNA mold is a pipe fitting mold in China.They manufacture all kinds of fitting molds,such as PPR,PVC,PP,BALL VALVE and so on.They continued to make create value for customers.Explore more,please visit http://www.cnpipingmould.com

How to use checking fixture?

First, check the plug gauge surface before use, and there should be no rust, scratches, dark spots, etc.; signs of plug regulations should be correct and clear. Second, the standard conditions for plug gauge measurement are: temperature is 20°C, and force measurement is 0. It is difficult to meet this requirement in practical use. In order to reduce the measurement error, try to use the plug gauge and the device under test to measure under isothermal conditions. Use a force that is as small as possible. Do not push the plug gauge into the hole or push it sideways. Third, when measuring, the plug gauge should be inserted or pulled out along the axis of the hole, and should not be tilted; plug gauges should be inserted into the hole, and it is not allowed to turn or shake the plug gauge. Fourth, it is not allowed to use plug gauges to detect unclean workpieces. Fifth, the plug gauge is one of the precision measuring instruments. It should be handled with care and must not touch the working surface. Sixth, plug gauges should be cleaned with a clean soft cloth or fine cotton yarn immediately after each use, coated with a thin layer of anti-rust oil, into a special box, dry place storage Seventh, the plug regulations should be subject to periodic verification. The verification period shall be determined by the measurement department. When used, the correct operation of the gauge can be summarized as “light”, “positive”, “cold”, “full”. Light: Handle gently, securely and steadily; do not throw at random; do not collide with the workpiece, check after the workpiece is stable; check to lightly plug the light card, not hard card hard plug. Positive: The position must be placed positively, and it cannot be skewed, otherwise the test result will not be reliable. Cold: The inspection can only be carried out when the workpiece to be inspected is at the same temperature as the gauge. It is not possible to test the workpiece that has just been processed and is still hot. The precision workpiece should be isothermally measured with the gauge.
Full: Gauges are required to test the workpiece in order to obtain correct and reliable inspection results. The plug end must be inspected over the entire length of the hole and must be tested in 2 or 3 axial planes; It may be tested at both ends of the hole. Both the end of the caliper and the end of the caliper should be tested along the shaft and at no less than 4 positions around the shaft.

Why RIXING checking fixture

Our company submit through three processing, edm, CNC milling and other processing technology, can make the control precision of the datum of below 0.1 mm type precision control in 0.15 mm below the following, we strictly treat each pair of checking fixture, adopt surface oxidation treatment, not only to submit more beautiful, but also

RIXING checking fixture
RIXING checking fixture
wear resistance, corrosion resistance and rust.

RIXING CHECKING FIXTURE

RIXING is a Auto checking fixture manufacturer in China,with more than ten years specialized in checking fixture They have made these products such as automotive checking fixtures, BIW-Welding-Assy checking fixtures,electronic checking fixtures,precision standard parts and motorbike checking fixtures.The size of welding assembly mold (precision of inspection tool) can be effectively controlled by testing the size of welding assembly. Meanwhile, the size of the mold can be adjusted by the deviation of size to ensure the outflow of qualified products and meet the requirements of the drawings, so as to meet the automotive product assembly process.https://www.checkingfixture.net/Products/checking-fixture-for-automotive/

checking fixtures supplier in China

checking fixtures supplier in China

Taizho rixing automobile equipment co.,ltd is engaged in making all kinds of checking fixture,

like : checking fixture for automobile front bumer , checking for weld auot body etc.

we survived in the most fierce competive market, because our innovation work in checking fixture fields.

we develop an intelligent checking fixture machine which can improve checking efficiency for auto accessory size measurement.

and now ,this machine is already sold to Geely group. a famous auto maker in world.

pls visit our official website: www.checkingfixture.net , leave any question to me.https://www.checkingfixture.net/Products/checking-fixture-for-automotive/